Technical Data - INQUA Vernebler BR021200 Manual De Instrucciones

8 TECHNICAL DATA

8.1 General
Recommended nebuliser gases:
Minimum flow:
Corresponding minimum operating
pressure:
Maximum flow:
Corresponding maximum operating
pressure:
Minimum fill volume:
Maximum fill volume:
8.2 Aerosol characteristics in accordance
with EN 13544-1 appendix CC
The output of the nebuliser depends on the medication being
used. Consequently, the following data may not apply for medi-
cations that exist as suspensions or are very viscous. If in doubt,
ask the manufacturer of the medication concerned for advice.
Determination of particle size
Fill the INQUA
then attach the INQUA
Generation Impactor™) and run for 3 minutes.
®
nebuliser with 3 ml of a 2.5% test solution and
®
nebuliser to an impactor (NGI™ = Next
Air
3.0 l/min.
50 kPa (0.5 bar)
6.0 l/min.
200 kPa (2.0 bar)
2 ml
8 ml
en
67