Logan F300-1 Manual De Instrucciones página 2

Instruction Manual
Identification
Depth Guage
Beam
Knob
Vise
Beam - Adjustable cross bar which contains lever
and V-nail driver.
Magnetic Tip - Spring loaded pin attached to V-nail
driver which V-nails set on.
Depth Gauge - Indicator connected to beam which
adjusts beam to proper height for driving V-nail.
Knobs- allow beam to be moveable for adjustment.
Support Rods - Rods which set into base board and
provide support for beam.
Vise - Used to secure moulding for corner joining.
1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
Studio Joiner
Support Rod
Spring
Button
Handle
Lever
Magnetic Tip
Spacer
Handle - Used to tighten or loosen clamp jaw.
Spring Button - Press down and slide handle to quick
adjust clamp jaw into position.
Spacer - Used for irregular shape moulding to pro-
vide solid surface for joining.
V-Nails - V-shaped fasteners used to hold moulding
corners together.
Levelers - Small blocks designed to stabilize lengths
of moulding extending off the board to help with
beam height adjustment.
Model F300-1
Levelers
V-Nails