Logan F300-1 Manual De Instrucciones página 4

Instruction Manual
Assembly Procedure
1. Slide support rods into sleeves in board (Fig. 1).
2. Attach support rods with rod screws and
washers using rod wrench (Fig. 2).
3. Slide lever assembly over support rods (Fig. 3).
4. Screw knobs into lever assembly (Fig. 4).
Fig. 1
3
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
Studio Joiner
Fig. 2
Model F300-1
Fig. 3
Fig. 4