Logan F300-1 Manual De Instrucciones página 8

Instruction Manual
Operation Continued
C. To Join Multi Sided Frames
Note; The steps below apply to all five sided, six
sided and eight sided frames.
1. Once the frame has been 'strap clamped'
(not provided) the Beam must be removed.
2. The clamped frame may now be placed over one
of the Post's (Fig. 20).
3. The Beam can now be replaced.
4. The Beam must have the correct height set by
using the Vise that is currently not being used.
Simply place the Vise upside down on the board
and set height as described earlier in this manual
(Fig. 21).
5. The V-Nails can now be pressed in, in the normal
fashion (Fig. 22).
6. Once all the frame corners have at least two
V-Nails, simply remove the Beam and remove the
frame.
7
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
Studio Joiner
Fig. 20
Fig. 21
Fig. 22
Model F300-1