Meter For Counting Unit Washes; Setting The Metered Amount Of Detergent; Selecting Hot Or Cold Water - Kärcher SB-HDW S 1 Manual De Instrucciones

English
B Operating information and
settings
l/h
50
40
30
20
10
0
50
1 10
B 8
Operating Instructions

2.3.7. Meter for counting unit washes

The total number of unit washes sold can be read off.
n Display must show washing time-credit
n Press briefly the white button on the printed circuit board.
Unit washes sold are shown flashing for 10 seconds.

2.3.8. Setting the metered amount of detergent *)

The amount of detergent metered can be set between
0 and 50 litres per hour. The specification is dependent on
the fluidity of the detergent used.
See the table at the side for amounts metered for specific
values (approximate data). Precise values can be
determined by measuring the amount of detergent
siphoned in. The recommended setting is specified in
Chapter G. Accessories.
Function
Detergent
amount
99
metered
Programme 1
Detergent
amount
metered
Programme 3

2.3.9. Selecting hot or cold water *)

Hot or cold water can be set separately for each washing
programme.
Function
Programme
1 HP wash
Programme
2 Rinse
clear
Programme
3
Conservatio
*) For example, see 2.3.10. Basic setting.
SB-HDW S 1 / SB-HDW S 2
Menu Setting
item range
2
0...50 l/h
3
Menu Setting
item range
4
5
cold/hot
6
Indication
on display
2=00...99
3=00...99
Indication
on display
4=00/01
5=00/01
6=00/01