Maintenance Tasks; Cleaning The Coin Mechanism; Oil Change - Kärcher SB-HDW S 1 Manual De Instrucciones

English
E Care and maintenance
MIN
E 5
Operating Instructions
4.

Maintenance tasks

4.1. Cleaning the coin mechanism

n Open the coin acceptor, and clean the coin mechanism
with a moist cloth.

4.2. Oil change

!
Danger!
Burns hazard due to hot oil and hot system components.
Wait 15 minutes for system to cool down before changing
the oil.
i
Important!
Waste oil should always be delivered to a properly
designated collection point. Polluting the environment with
waste oil is a criminal offence.
Oil type: Hypoid SAE 90 (Order no. 6.288-016)
Oil volume per pump: 0.75 L
The procedure for changing the oil is as follows:
n Place drip pan under pump.
n Remove cap on oil reservoir 3.
n Remove oil drain plug 4, so that oil flows into drip pan.
n Renew sealing ring (A14 x 18), and refit oil drain plug 4.
n Slowly pour in new oil until the level reaches the MAX
mark on the oil reservoir 3.
n Refit and secure cap on oil reservoir 3.
n Deliver waste oil to a prescribed collection point.
SB-HDW S 1 / SB-HDW S 2