Stryker Birthing Bed Manual De Instrucciones página 26

English
Raising or lowering the siderails (Continued)
EN
When raising the siderails, listen for the "click" that indicates that the siderail has locked in the raised position. Pull firmly
on the siderail to make sure it is locked into position.
To raise the siderail to its highest position, rotate the
siderail forward to the full up position
page 1-20).
Note: The siderail does not lock into the intermediate
position when you raise the siderail.
To lower the siderail to the intermediate position, push in
the release handle and rotate the siderail backward until it
locks into the intermediate position
1-20).
To lower the siderail to its lowest position, push in the
release handle again and rotate the siderail backward
until it is completely lowered
Note: Make sure that the siderail is in the lowest position
before raising the siderail directly to the full up position. If
you do not completely lower the siderail, the siderail will
lock into the intermediate position when you raise the
siderail.
1-20
Operation
(Figure 1-13 on
(Figure 1-14 on page
(Figure 1-15 on page 1-20).
4701-209-0 01 REV A
Figure 1-13: Siderail full up
Figure 1-14: Siderail intermediate height
Figure 1-15: Siderail lowered
www.stryker.com