Brinkmann 810-8410-S Manual Delpropietario página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CYLINDER SPECIFICATIONS:
When purchasing
or exchanging
a cylinder for your gas grill, it must be constructed
and marked in
accordance
with the specifications
for LP gas cylinders
of the U.S. Department
of Transportation
(DOT) or the National Standard
of Canada, CAN/CSA-B339
Cylinders,
Spheres
and Tubes for
Transportation
of Dangerous
Goods; and Commission,
as applicable;
and provided with a listed
over-filling
prevention
device (OPD), and provided
with a cylinder connection
device compatible
with
the connection
for outdoor cooking appliances.
The cylinder
must also be equipped with:
A shut-off valve terminating
in a Type 1 gas cylinder valve outlet.
A Type 1 valve that prevents
gas flow until a positive seal is obtained.
An arrangement
for vapor withdrawal.
A collar to protect the cylinder shut-off valve.
A safety relief device having direct communication
with the vapor space of the cylinder.
A listed over-filling
prevention
device (OPD).
Turn off the cylinder valve when your grill is not in use.
Handle
the tank with care.
Always secure the cylinder
in an upright position.
Never connect
an unregulated
LP gas cylinder to your grill.
DO NOT expose LP gas cylinders
to excessive
heat or ignition sources.
DO NOT store a spare LP gas cylinder
under or near your grill.
Allow only qualified
LP gas dealers to fill or repair your LP gas cylinder.
DO NOT allow the cylinder to be filled
beyond 80% capacity.
Read and follow
all warnings
and instructions
that are on the cylinder and that accompany
this
product.
Never store a spare LP gas cylinder
under or near your grill. This could cause excess pressure
to be expelled through
the vapor relief valve resulting
in fire, explosion,
or severe personal
injury including
death.
Note:
PROPANE
GAS IS HEAVIER THAN AIR AND WILL COLLECT
IN LOW AREAS.
PROPER
VENTILATION
IS EXTREMELY
IMPORTANT.
Keep the ventilation
opening(s)
of the LP gas cylinder
enclosure
free and clear from
obstructions
and debris.
DO NOT insert any foreign
objects into the valve outlet. Damage to the back-check
could
result. A damaged
back-check
can cause a leak, possibly
resulting
in explosion,
fire, severe
bodily harm, or death.

Publicidad

Tabla de contenido
loading

Tabla de contenido