Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LEAK TESTING"
To prevent fire or explosion
hazard:
•
DO NOT smoke or permit ignition sources
in the area while conducting
a leak test.
•
Perform test OUTDOORS
only in a well ventilated
area,
•
Never perform a leak test with a match or open flame,
•
Never perform a leak test while the grill is in use or while grill is still hot.
WHEN TO PERFORM A LEAK TEST:
After assembling
your grill and before lighting for the first time, even if purchased
fully assembled.
•
Every time the LP gas cylinder
is refilled or if any of the gas components
are replaced.
•
Any time your grill has been moved,
•
At least once per year or if your grill has not been used for more than 60 days,
CHECKING FOR LEAKS:
1.
Create a mixture of 50% water and 50% liquid dishwashing
soap.
2.
Open the lid.
3.
Ensure all control knobs are set to the "OFF" position.
4.
Turn on the fuel supply at the cylinder valve. Turn the
cylinder valve knob one turn counter-clockwise.
5.
Apply the soap water mixture to the following:
Watch For Bubbles
O
(_
Supply tank (cylinder) weld.
(_
Connection
nut to tank valve.
(_
Back side of connection
nut to brass
nipple.
(_)
Brass nipple connection
into regulator.
(_)
Regulator
connections
to gas supply
hoses.
(_
Gas supply hose connection
to side
burner valve assembly.
(_)
Side burner valve stem cap.
(_
Side burner connection
to hose.
(_)
Hose connection
to gas manifold.
(_
The full length of gas supply hose.
(_)
Tank valve to cylinder.
_
8
Publicidad
Tabla de contenido
