The Helmet; Ece Approval; Anatomy The Helmet; Outer Shell - SCHUBERTH S2 Manual Del Usuario

C. THE HElMET
1. STANDARD
The S2 conforms to the ECE-R 22.05 standard. This testing norm
guarantees conformity to defined safety standards in respect of
impact absorption, visor, retention system and field of vision.
The certification applies to all the countries of the European
Union and all countries that recognise the ECE standard. It also
guarantees conformity with all insurance requirements that are
important in the event of a claim.
Please note that this S2 with ECE approval is not certified for the
USA, Canada or any other EU countries. It is only permitted for
use in countries where the ECE standard is valid.
Note:
The only SCHUBERTH helmets that it is legal to use in the
USA, Canada or other non-EU countries are those with the
appropriate approval and technical specifications.
Further information and details of sales outlets for these
helmets can be found on the internet at:
www.schuberth.com/us/home

2. ECE APPROVAL

ECE test standard
Certification number
051234/P-1234
54
Certifying authority
Serial number
3. ANATOMY OF THE HELMET
Integrated antennas
Face shield
Reflex eyes
Sun visor
Inner lining
Face shield ventilation /
Chin ventilation
Chinstrap
(with ratchet fastener)

4. OUTER SHELL

The outer shell of the S2 helmet combines an aerodynamically
optimal shape with consistent protection. It consists of a special
glass-fibre reinforced special duroplastic matrix developed by
SCHUBERTH, which gives the helmet the high level of strength
needed for your protection.
Caution:
The safety helmet is designed to absorb the effects of only
one impact. The helmet must be replaced after a fall,
accident or any other impact.

5. INNER SHELL

For optimised impact absorption properties, the inner shell
of the helmet consists of several components. The complex
multi-segment foam padding of the main body provides better
absorption and dissipation of impact forces and gives you the
highest level of safety.
Head inlet vent
Inner shell
Head outlet vent
®
Pinlock visor
Face shield mechanism
Outer shell
Retention system
(with anti-roll-off system)
Operating slide for
sun visor
55