Throttle Control; Clutch Control; Engine Stop Button - Husqvarna TC 250 2012 Manual Del Usario

THROTTLE CONTROL

The throttle knob (1), is located on the right hand side of the
handlebar. The position of the throttle control can be adjusted
by loosening the two fastenig screws (A).
CAUTION
Do not forget to tighten the screws (A) after
the adjustment.
FRONT BRAKE CONTROL
The brake control lever (2) is located on the right hand side of
the handlebar. The position of the throttle control can be ad-
justed by loosening the two fastenig screws (B).
CAUTION
Do not forget to tighten the screws (B) after
the adjustment.
B
A
1
2
EN - 10 SPECIFICATIONS - OPERATION - MAINTENANCE

CLUTCH CONTROL

The hydraulic clutch control lever (3) is located on the left-hand
side of the handlebar and is protected against dirt with a rub-
ber guard.
The position of the clutch control on handlebar can be adjusted
by loosening the retaining screws (C).
CAUTION
Do not forget to tighten the screws after the
adjustment.
C

ENGINE STOP BUTTON

On the left side of the handlebar, near the clutch control, is lo-
cated the engine stop button.
3
1