Removing The Front Wheel - Husqvarna TC 250 2012 Manual Del Usario

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that the front
wheel is lifted from the ground. Loosen the bolts (1) holding
the wheel axle (2) to the front fork stanchions.
Hold the head of the wheel axle (2) in place, unscrew the bolt
(3) on the opposite side; draw the wheel axle out.
EN - 32 SPECIFICATIONS - OPERATION - MAINTENANCE
NOTES
Do not operate the front brake lever when the wheel has been
removed; this causes the caliper piston to move outwards. After
removal, lay down the wheel with brake disc on top.
1
2
1
3