Software Update; Usb Memory Stick - Cebora KINGSTAR 400TS Manual De Servicio

CEBORA S.p.A.

2.6 Software update

Power source software can be updated using a USB memory stick or the WEB
interface.

2.6.1 USB memory stick

To update the software using the USB memory stick, follow the steps below:
-
copy the file with the ".psu" extension for power source Item No 372/374.00
(downloadable from http://www.cebora.it)
-
with the power source powered, insert the memory stick into one of the two USB
ports on the panel
-
check that the memory stick is recognised (the typical USB memory stick icon will
appear on the LCD monitor)
-
select MENU->SETTINGS->MANAGE USB-> UPDATE FIRMWARE
- press the knob
-
turn the knob to select the .psu file previously loaded onto the memory stick
-
press SELECT to start the update
The power source will restart automatically once the update is complete
NOTE 1: the power source supply must ALWAYS be on during the update.
NOTE 2: if the update fails, turn the power source off and on again and repeat the
update procedure. If the update fails again, please contact Customer Service.
3301045
66
17/09/2019