Blast Chill Or Shock Freeze Personalize Cycle - TRAPEZA 7NU0309CG54 Manual Uso Y Mantenimiento

GB - 26
7.3.5. BLAST CHILL OR SHOCK FREEZE PERSONALIZE CYCLE "A" ,
It is possible to modify the breakdown/freezing cycle:
personalising them as required.
The breakdown or freezing cycle is divided into three phases where it is possible to modify the following
values:
IN ORDER TO MODIFY THE DATA IN NOT PERMANENT WAY
Press the relevant key
a- set cabinet temperature phase 1/2/3/4
Control displays (Fig.12):
SCREEN 1 - modifi able cell temperature
SCREEN 2 - no signal (off)
SCREEN 3 – the number of the phase (Fig
(Fig.12)
The cell temperature symbol
is increased or decreased.
b- set % rotation speed of cabinet fan/s phase 1/2/3/4
With a further pressing the
value of the rotation speed of the fan/s of the cell increases or decreases.
c- set pin temperature phase 1/2/3
With a further pressing the
the set pin temperature changes.
d- set duration phase 1/2/3
With a further pressing the
the set time value increases or decreases.
Repeat the same procedure described for the later phases 2 and 3.
Phase 4 of conservation only involves setting the set temperature. To confi rm the settings of all the
phases described, press the relevant key
Press the
At the end of the cycle the machine moves into conservation phase automatically, see 7.3.7.
By rotating the
described at ch. 7.3.8.
The new sets of the personalised cycle will be lost when the machine is stopped with key
See tecincal manual
S _ _ = setpoint
SET CABINET
SET FAN SPEED
SET CORE
SET TIME
IN ORDER TO MODIFY THE DATA IN PERMANENT WAY (see tecincal manual)
automatic "A",
/
button to start the cycle.
displays the duration of the cycle just fi nished, and it can be stored as
timed
/ (+3) / (-18) for extended time.
fl ashes, by rotating the
number 100 appears, by rotating the
the pin symbol fl ashes
the clock symbol fl ashes, by rotating the
/ /
BLAST CHILL OR SHOCK FREEZE
PHASE 1 PHASE 2
S01 S04
S50 S51
S02 S05
S03 S06
,
probe ,
the value of the set temperature
value of the set %
, by rotating the
(+3) / (-18) for extended time.
PHASE 3
S07
S52
S08
S09
value of
value of
.
CONSERVATION
PHASE 4
S10
S53
- -
- -