Milnor MilTouch-EX 48040H7K Guía Del Operario página 13

3.1.2.3. Control on Clean Side (21)
3.1.2.4. Too Many Recycles (22)
3.1.2.5. Check Balance System/Excursion Switch (23)
3.1.2.6. Can't Find Wash Position (24)
3.1.3. Messages that Can Occur on Automatic Load/Discharge
™
MilTouch-EX
3.1.3.1. Brake Pads Worn (16)
3.1.3.2. Loading Aborted (19)
3.1.3.3. Discharge Aborted (20)
3.1.3.4. Invalid Formula (21)
3.1.3.5. Load Eye Blocked (22)
3.1.3.6. Up Lock Not Made (23)
3.1.3.7. Invalid Work Order (24)
3.1.3.8. Invalid Goods Code (25)
3.1.3.9. Invalid Customer Code (26)
3.1.3.10. Invalid Employee Code (27)
3.1.3.11. Can't Find Data (28)
3.1.3.12. Chute Door Not Closed (29)
3.1.3.13. Bifold Door Not Closed (30)
3.1.3.14. Bifold Door No Open (31)
3.1.3.15. Can't Find Load Position (32)
3.1.3.16. Can't Find Wash Position (33)
3.1.3.17. Can't Find Unload Position (34)
3.1.3.18. Chute Locked Up (35)
3.1.3.19. Chute Locked Down (36)
3.1.3.20. Load Eye Not Blocked (37)
3.1.3.21. Too Many Recycles (38)
3.2. Outputs and Inputs for MilTouch-EX Controller
BICLWT02)
3.2.1. Outputs
3.2.2. Inputs
3.3. Out-of-balance Detection and Balancing for Washer-
extractors
(Document BICLUF02)
®
3.3.1. MilTouch Models
®
3.3.2. MilTouch-EX
3.3.2.1. If the Next Operation is an Intermediate Extract
Sections
Models Only
Models Other than 72046M5K
Figures, Tables, and Supplements
(Document
Table 1: Outputs on 8-output 16-input
Boards
Table 2: Outputs on 24-Output Board 1
Table 3: Outputs on 24-Output Board 2
Table 4: Inputs on 8-output 16-input Board
1
Table 5: Inputs on 8-output 16-input Board
2
9
Table of Contents
PELLERIN MILNOR CORPORATION