Milnor MilTouch-EX 48040H7K Guía Del Operario página 18

Chapter 1. How to Use the MilTouch-EX
enter the new value. Finally, touch the checkmark button to save the new value and go
back one level. To abandon the most recent change, touch the Exit button.
Figure 4: The Step Choices Display
.
4. Touch the Save Changes button
in the formula (Figure
5. Touch the Home button to go to the Home display
Supplement 2
Use the No Steam option unless your machine is configured for steam and connected to a
steam supply line.
No Steam—No steam is allowed in this bath step.
After, Runs—Steam starts only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer runs when the steam valve is open.
Stops—Steam begins only after the commanded bath level is achieved. After temperature is
first achieved, no more steam is allowed in the step. The timer stops running when the steam
valve is open.
After, Stops—Steam begins only after the commanded bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer stops running when the steam valve is
open.
Early, After, Runs—Steam starts when the lowest safe bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer runs when the steam valve is open.
Early, Stops—Steam starts when the lowest safe bath level is achieved. After temperature is
first achieved, no more steam is allowed in the step. The timer stops running when the steam
valve is open.
Early, After, Stops—Steam starts when the lowest safe bath level is achieved. If necessary,
steam is allowed to maintain temperature. The timer stops running when the steam valve is
open.
PELLERIN MILNOR CORPORATION
™
Washer-Extractor Control
Typical View
(Figure 4) to save the changes. The control displays the steps
3).
About the Steam Codes
14
Legend
A. Step Choices buttons
B. Save Changes button
C. Abandon Changes button
(Figure 1).