Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 4. Additional Information
Figure 43: Serial Ports Identification
A.
Location of RS-485 Port #1
B.
Location of RS-485 Port #3
.
How to Configure the Controller Software
4.1.4.
Refer to
Table 6
near the top of this document. If the processor board and the software meet the
requirements for communicating through Port 1, and the serial link is connected to Port 1, then
verify that the machine controller is configured for Com Port = Port 1 (see
of these requirements is not met, verify that the controller is configured for Com Port = Port 3.
Figure 44: Configure Screen (Page 1)
PELLERIN MILNOR CORPORATION
Detail
Legend
— End of BICLWC03 —
56
Figure
44). If any one
Publicidad
Tabla de contenido
