Hupfer Powerstapler PSUH Manual De Instrucciones página 51

Section 5
Page 22
NOTE
§
Place the first heat-retaining base parts on the centre of the stacking platform and lower them slowly.
§
Put further items precisely onto the heat-retaining base parts already placed in the appliance.
§
Briefly press down the entire stack once the marking for the maximum stack height has been
reached.
Figure 6
§
Then close the covers.
NOTE
Unloading crockery
WARNING
§
Open the cover.
§
Remove the heat-retaining base parts.
§
Close the cover again.
Powerstapler
PSUH
Loading
Before the stacks are inserted, the crockery guide and the stack height must
be set correctly.
Insert the items individually or in small safely manageable stacks.
The marking for the maximum stack height must not be exceeded.
Fill level marking
Heating time
Completely filled Powerstapler need approx. 3 h to heat up the heat-retaining
base parts to 130 °C.
Risk of burning
In the heated appliances the temperatures can exceed the permitted maxi-
mum temperatures of 65°C for touchable appliance surfaces.
Never reach into the appliance or touch the heating element with fingers dur-
ing use. Always wear protective gloves.
Operation
Operation
91346811_A1