Accessories; Eliminating Malfunctions; Positioning Status And Controller Enable - Festo CMFL Instrucciones De Utilizacion

CMFL
10

Accessories

Note
• Please select the appropriate accessories from our catalogue
www.festo.com/catalogue
11

Eliminating malfunctions

Positioning status and controller enable

LED display
Green, illuminated
Green, single flashing
Green and orange
alternate, single flashing
Green and orange
alternate, double flashing
Fig. 15
38
Status
Ready for operation; a positioning procedure can be started
Ready for operation; not enabled
During switch-on, the "Teach Mode" bit combination was on.
The Enable input must now be set to HIGH to start a Teach procedure.
The "Teach Mode" is active (i.e. teaching is currently being carried out).
This procedure can take up to 4 minutes.
Festo – CMFL – 1304b English