ASSEMBLY INSTRUCTIONS
10. Loosen the two shoulder screws without fully
removing the hanger bracket (A). Assemble canopy
(C) by rotating keyhole slot in canopy over shoulder
screws in hanger bracket (A). Tighten shoulder
screws. Securely attach and tighten the canopy hole
cover (J) over the shoulder screws in the hanger
bracket (A) utilizing the keyhole slot twist-lock
feature.
11. Attach blade iron (D) to blade (K) with blade screws.
Do not tighten blade screws until each screw has
been started. Then, tighten each screw starting with
the center screw.
Repeat for remaining blades
Hardware Used
Blade Screw
12. Attach blade irons (D) to the motor assembly (F)
with the screws provided.
Hardware Used
Blade Iron Screw
10
C
11
x 12
12
x 8
10
A
J
K
D
F
D
Shoulder
Screw