Kichler 35166 Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
5. Carefully lift the fan and seat the downrod (B)/hanger
ball assembly on the hanger bracket (A). Be sure the
groove in the ball is lined up with the tab on the
hanger bracket (A).
6. For Canadian installation and for USA fans over 35
lbs, the safety cable must be installed into the house
structure beams using a 3" lag screw. Make sure
that when the safety cable is fully extended the lead
wires are longer than the cable and no stress is
placed on the lead wires.
Hardware Used
Lag Screw
Flat Washer
Spring Washer
5
B
6
Safety
Cable
x 1
x 1
x 1
Safety
Cable
7
A
Safety
Cable
Spring
Washer
Flat
Washer
Lag
Screw