Kichler 35166 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
1. Secure the hanger bracket (A) to the ceiling outlet
box using hanging bracket screws and hanging
bracket washers.
Important: If attaching the fan to a sloped ceiling,
make sure open end of mounting bracket is installed
facing the roof. Do not install fan on a ceiling with a
pitch greater than 18°.
Hardware Used
Hanging Bracket
Screw
Hanging Bracket
Washer
2. Loosen the set screws found on coupling on top of the motor assembly (F). Then remove the hair
and clevis pin that will be used on a later step.
2
x 2
x 2
Hair Pin
F
5
1
Outlet Box
A
Safety Cable
Coupling
Clevis Pin