Kichler 35166 Manual De Instrucciones página 12

ASSEMBLY INSTRUCTIONS
14
Protrusion
F
G
Notch
H
14.Connect wires from the motor assembly (F) to the light kit (H). Remove 1 of 3 screws from the
light kit housing (G) and loosen the other 2. Place light kit (H) to light kit housing (G) by aligning 3
notches on light kit (H) with 3 protructions on the light kit housing (G) together. Position keyhole
slots around the screws and twist clockwise. Insert the screw that you had previously removed.
Tighten all screws.
15
G
I
15. Screw shade (I) onto light kit housing (G).
12