Instructions For The User - Brasilia MODA Manual De Instrucciones Para El Usuario

INFORMATION TO THE USERS
Under Legislative Decree 25 September 2007, no.185 and art. 13, Legislative Decree 25 July 2005, no.151 "Implementation of Directives 2002/95/EC,
2002/96/EC and 2003/108/EC, regarding the reduction of use of hazardous substances in electrical and electronic equipment as well as waste disposal".
The barred waste container symbol on the equipment means that the product, at the end of its service life, must be disposed of separately from the
other types of waste.
The user must therefore convey the equipment, at the end of its service life, to the appropriate separate collection centres for electronic/electrotechnical
waste products or return it to the dealer when purchasing a new equivalent equipment.
The appropriate separate collection and the following sending of the used equipment to recycling, treatment and eco-friendly disposal will help avoid nega-
tive effects on the environment as well as on health along with an easier recycling of the materials forming the equipment.
Any unauthorized disposal of the product by the user will imply the enforcement of the administrative sanctions as set out in Legislative Decree no. 22/1997
(article 50 and following articles, Legislative Decree no. 22/1997).
BEFORE USING THE MACHINE, READ THIS MANUAL CAREFULLY FOR ITS CORRECT USE IN ACCORDANCE WITH THE CURRENT SAFETY STANDARDS.
ATTENTION: Important safety
indications
READ the instruction manual
machine carefully before using
the machine
IMPORTANT NOTICES
TECHNICIAN
The technician is the person responsible for the installation, the commissioning and programming of the machine. Calibration must be performed
only by the technician, who also holds the password for access to programming.
USER
The user is the person
The user is also in charge of cleaning the vending machine (see instructions under chapter 7.0). In the event of failure, the user
is required to call in the technician.
1 Spanner available for the
USER and the TECHNICIAN.
Instructions for the Technician

Instructions for the User

responsible for filling up the containers with soluble products, sugar, coffee, stirrers and cups.
Tools used in technical interventions on MODA machines
SOCKET SPANNERS n° 5.5 - 7 and 8
90° PIPE CUTTER
FLAT-JAW PLIERS
1.0 DESCRIPTION OF THE MACHINE'S TECHNICAL CHARACTERISTICS
2.0 PREMISE
3.0 TRANSPORTING THE MACHINE
4.0 INSTALLATION
5.0 DESCRIPTION OF OPERATION
6.0 SOFTWARE INSTRUCTIONS
7.0 MAINTENANCE AND INACTIVITY
8.0 DISMANTLEMENT
For any service or maintenance
switch off the machine
ATTENTION:
machine switched on
FIXED SPANNER n° 7 8-10 12-13 15-17 19-20
CROSS AND SLOT SCREWDRIVERS
(small – medium - large)
PLIERS FOR SNAP RINGS
INDEX
14
ENGLISH
ATTENTION: hot parts in contact!
CAUTION! Parts in motion
PE
Earthing indication