List Of Programme Commands; To Set Machine Parameters - FAS International JUST NOW Manual Del Usuario

18
10.2

LIST OF PROGRAMME COMMANDS

ACCESS TO SUBMENUS
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
E
COMMANDS from 27 to 39
N
Mode EXECUTIVE
G
L
Mode BDV
I
Mode MDB
S
H
TO SET REFRIGERATION PARAMETERS
Command
Command
Command
Command
Command

TO SET MACHINE PARAMETERS

Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
Command
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
01 Machine test
02 Calls submenu for setting the clock & daily timers
03 Recall of price setting submenu
04 Calls submenu for setting discounted prices
05 Recall the price reference setting submenu
06 Setting the product code
07 Display of sales for full price selection
08 Displays sales for selection discounted price
09 Displays totals cashed not clearable
10 Displays totals clearable
11 Setting the selection sequences
see paragraph: USING THE EXECUTIVE STD/EXECUTIVE PRICE HOLDING
PAYMENT SYSTEMS.
see paragraph BDV.
see paragraph MDB.
41 Sets cabinet temperature
44 Sets defrost cycle frequency
45 Setting the cut-out duration for the refrigeration safety device
46 Setting the trigger temperature for the refrigeration safety device
48 Setting trays with refrigeration safety device
50 Enter machine code
59 Stroke counter / error display
60 Erases the memory
61 Reset security/access code
62 Enable discount
63 Set the mono/multivend
64 Sets the message display language
66-67 Internal temperature and evaporator temperature display
68 Setting displayed currency description
69 Chooses functioning mode of the coin mechanism
70 Buzzer operation option
72 Enabling the microwave oven
79 Test for door locking device
80 Cloning
81 Fetch vend data
85 Display of checksum and main and power board software version.
90 Select AUDIT protocol
91 Enter machine identification data
92 Clear sales data
93 Displays the temperature status over the last 24 hours
94 Displays the last 10 power-offs
95 Enter user message 1 (max 63 characters)
96 Enter user message 2 (max 63 characters)
99 View error events
JUST NOW – Issue 00