Signature Kitchen Suite SKSCF1801P Guia De Instalacion página 17

NOTES
Trimmed units are designed to be customized with decorative panels. Field-installed 3/4" (19 mm)
custom door panels are required.
For custom panels: Use templates provided with units to pre-drill holes for mounting panel brackets
(provided with unit). Adjustment screws and instructions also provided with units.
Maximum total door panel weight for 30" column is 64 lb.
Maximum total door panel weight for 24" column is 53 lb.
Maximum total door panel weight for 18" column is 44 lb.
DESIGN TIPS
4" (102 mm) will be visible on the interior sides of the cutout. It is recommended that the
the optional frame kit may be used.
If using custom panels, a custom toe kick is required.
Door Handles: Handles are not included with the units.
Custom handles are required for installation. Brushed aluminum handles are available as an optional
accessory.
OPTIONAL ACCESSORIES – FLUSH OR PROUD INSTALLATION
SKSPK180CS SKSWK185LS
SKSPK185CS
SKSPK180CS/SKSPK185CS – STAINLESS STEEL PANEL
KIT FOR 18" FREEZER COLUMN
SKSWK185RS/SKSWK185LS – STAINLESS STEEL PANEL
KIT FOR 18" WINE COLUMN
This unit can be installed with an optional stainless steel
panel kit. The freezer column kit is reversible and can be
used in both right hand and left hand door swing installations.
The wine column panel kits are not reversible.
SKSFK800CS – FRAME KIT
This unit can be installed in a 24" (610 mm) deep cutout with
an optional frame kit. The kit includes two 80" (2032 mm)
brushed aluminum side trim pieces. Each trim piece is 5"
(127 mm) deep with a 1/8" (3 mm) front face.
HANDLES FOR USE WITH CUSTOM PANELS
SKSHK310HS – 31 11/16" (805 mm) Medium Brushed
Aluminum Handle
SKSHK480HS – 48" (1219 mm) Long Brushed Aluminum
Handle
DESIGN TIPS
SKSWK185RS
mm) cutout depth installation or in a proud 24" (610 mm)
cutout depth installation.
replacement installations where the existing cutout is 24"
(610 mm) deep.
17