Electrical Connection - Signature Kitchen Suite SKSCF1801P Guia De Instalacion

4
• Cabinet materials must be able to withstand the heat and humidity produced during product
operation and use without twisting or deforming.
bending. The product must be level both horizontally and vertically.
• Keep children away from area during installation.
• Do not use an extension cord or power strip with this product.
• Do not install the refrigerator in a damp location or where it will be exposed to running water.
Deterioration of the insulation on electrical parts may result, causing risk of electric shock.
• Connect to potable water only. Non-potable water can cause health risks.
• If connected to a circuit protected by fuses, use time delay fuse.

Electrical Connection

Use a dedicated outlet.
Plug in the power plug with the power cord facing downward.
When installing or moving the refrigerator, be careful not to roll over or damage the
power cord. Do not squeeze or crush the cord or plug when pushing the refrigerator in.
Do not allow the power cord to be bent, crushed, or damaged. Do not run the power
Do not extend or modify the length of the power cord.
Turn off the power before cleaning or moving the refrigerator.
• Failure to do so may cause electric shock or injury.
• Press the POWER button for 3 seconds to turn off the power at display panel.
Do not pull out the cord or touch the power plug with wet hands.
Doing so may cause electric shock or injury.
Remove water or dust from the power plug and insert it securely into the wall socket.
Do not unplug the refrigerator by pulling on the cord.
Do not use the power cord or the power plug if it is damaged or if the outlet is damaged.
Wait for 5 minutes or longer when reconnecting the plug or turning the power back on.
Give the compressor time to cycle before restarting.