Attaching The Appliance To The Enclosure - Signature Kitchen Suite SKSCF1801P Guia De Instalacion

34
Attaching Appliance to Enclosure
WARNING
• To avoid tipovers, the appliance must be attached to the top
of the enclosure.
• The top of the enclosure must be made of a solid material
(not MDF) that is at least 5/8" (16 mm) thick.
1. Screw the lugs on the safety bracket at the top of the
appliance to the top of the enclosure.
2. If there is a large gap between the top of the appliance
and the top of the enclosure, insert a piece of wood
gap.
3. Screw the side safety brackets to the sides of the
enclosure.
NOTE: If installing two appliances side-by-side, attach the
Attach them to the sides of the enclosure as if they
were one unit.
the top of the appliance until it engages with the top safety
bracket.
assembly in under it and snap the top
into the base (b).
NOTE: If installing two appliances side-
by-side, attach both top covers
using the bolt found in the
accessories package.