Signature Kitchen Suite SKSCF1801P Guia De Instalacion página 33

WARNING
To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with
LEVELING
Once the appliance is aligned properly in the enclosure, level it using the front and rear leveling
legs.
2. Turn the screws as shown above to raise the appliance. Turn the screws in the opposite
direction to lower the appliance.
3. Make sure the weight of the refrigerator is carried on the legs, not the wheels.
4. Use a smartphone leveling app or place a carpenter's level on the top and sides of the
appliance to check that it is level and plumb. Or use the provided gauge tool to measure the
CAUTION
- If using a power drill, use the lowest torque setting.
- Leave at least 3/8 inch (10 mm) between the top front of the appliance and the top of the
- Do not exceed 20 inch-pounds (2.25Nm) of torque.
- 20 revolutions equal 1/16"(2mm) of height adjustment.
Leveling
33