Side-By-Side Flush Installation - Signature Kitchen Suite SKSCF1801P Guia De Instalacion

Side-by-Side Flush Installation

FLUSH INSTALLATION CLEARANCES
NOTE: When installing products with a partition between them, follow the standard installation. The
minimum size of the partition is 6" (15.2 cm) to avoid interference between the doors.
must be used to seal the appliances together.
The kit contains a sealing mat which helps prevent
condensation from forming between the two
appliances.
accessories are missing.
2. Place appliances near to each other in the intended
3. Remove the base panels from both appliances.
4. Attach the included sealing mat on the side of the
freezer that faces the refrigerator. (The sealing mat
should be between the two appliances after they
are connected.)
Install the gray sealing mat over the preinstalled
black sealing strips so that the edge of the mat is
Signature Kitchen Suite (part number SKSFJ800P).
NOTE:
When installing 2 side-by-side products with
one left and one right door swing, 1/16" (2 mm)
clearance is required between the products.
installations.
1X
1X
2X
1X
1X
4X15 4X
M6X20 6X
strip
45
1X
sealing strip
(both sides)
sealing mat