Printer Configuration; Set Date And Time - Selecta STERIL- Food 20L Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80282 REV D
P8 121ºC 05・PRESS
1.5bar 080ºC START
CONFG/
CONFIGURATION
CONFG/PRN
PRINTER
CONFG/PRN/SET
PRINTER STATUS
CONFG/PRN/INT
PRINTER INTERVAL
CONFG/
EXIT
P8 121ºC 05・PRESS
1.5bar 080ºC START
P8 121ºC 05・PULSE
1.5bar 080ºC START
CONFG/
CONFIGURATION
CONFG/
DATE/TIME
CONFG/TIME
20/02/2007 12:16:12
CCONFG/CLOCK
12:16:12
CONFG/CLOCK
EXIT
P8 121ºC 05・PRESS
1.5bar 080ºC START
J
.P. SELECTA s.a.u.

9.5 Printer configuration

To enable and configure the printer, go to the «CONFIGURATION» menu and
press the knob.
«LANGUAGE» will appear on the screen. Turn the button until the «PRINTER»
submenu appears.
OFF Press the knob, «PRINTER STATUS» will appear on screen.
01
In this screen, printer status (ON or OFF) is indicated.
By pressing the knob, you can enable / disable the printer.
Turn the knob and «PRINT INTERVAL» will appear on screen.
Press the knob and turn to change the time in minutes. Confirm by pressing again.
Turn the knob. «PRESS BUTTON» will appear.
This function executes a paper feed of the printer, whenever the knob is pressed.
This is normally used during paper roll changing.
Turn the knob until «EXIT» appear on the screen.
Press again to exit to «CONFIGURATION» menu.

9.6 Set date and time

Use this menu to update the autoclave clock time and date.
Go to the «CONFIGURATION» menu and then press the knob to enter.
«LANGUAGE» will appear.
Turn until «CLOCK» appears.
Press the knob and «CHANGE DATE» will appear.
The date and time will also appear.
To modify the day, month, year ... select by turning the knob, confirm by press-
ing, again modify by turning and press to confirm.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
DIC/2018 (Sujetas a modificaciones sin previo aviso) Pag.: 40
Tel 34 937 700 877 Fax 34 937 702 362