Safety advice for the adjustments
Adjustment work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
Adjusting the spacing between the packing wheels and the ploughshare
The packing wheels (C) are used to ridge and compact
the soil around the planted seedlings.
The distance between the packing wheels and the
ploughshare must be adjusted according to the type of
ground.
Proceed as outlined below.
1) Lift the lever (B).
2) Turn the lever (B) to move the packing wheels (C)
closer to or away from the ploughshare (D).
3) After adjustment, return the lever (B) to the original
position.
If the part is not locked properly, tighten the lever (see
"Adjusting the packing wheel lever tightness").
Carry out the same operations to adjust the packing
wheels of the other planting units installed.
Planting depth adjustment
For adjustments, proceed as outlined below.
1) Turn the knob (A) to increase or decrease the depth
of the furrow.
English language
ADJUSTMENT INFORMATION
moved, and adopting all the necessary safety meas-
ures required to work safely.
UN41-0480MM
UN41-0489MM
13
B
A
Use and maintenance
5
D
C