Safety advice concerning use
This ensures the machine can only be used by fit and
healthy personnel, who are suitably trained and au-
thorised, and hold the appropriate category driving
licence for a tractor.
Make sure nobody and no animals are in the machine
work and manoeuvring area.
The tractor driver is responsible for assessing the
hazards associated with envisaged environmental
conditions, e.g., specific ground conditions (loose
soil, slippery, sloping ground, etc..) which require
special precautions, and it is up to the driver to take
the necessary measures to eliminate or reduce these
hazards.
Description of the controls
Each planting unit is equipped with independent controls.
C
C
UN41-0500MM
A) Knob: this is used to adjust the planting depth (see
page 13).
B) Lever: this adjusts the spacing between the packing
wheels and the ploughshare (see page 13).
C) Lever: this is used to change the position of the sup-
port wheel and of the driving wheels in relation to
the soil and to help maintain correct work vehicle po-
sitioning during work.
English language
INFORMATION FOR USE
Do not exceed the permitted gradients established
for the tractor with the equipment mounted on it
(see tractor user manual).
Keep the parts where operators tread clean to pre-
vent loss of balance when getting on and off the
work vehicle.
Before transiting on public roads, check that the trac-
tor/work vehicle assembly complies with highway
code regulations.
Check, during planting, that the tractor exhaust gas
is not emitted in the direction of the work vehicle's
operators.
E
A
B
D) Lever: this adjusts the weight of the packing wheels
on the ground (see page 24).
E) Nut: this adjusts the weight of the float wheels on
the ground (see page 24).
27
D
C
Use and maintenance
6