Yakima Q-TOWERS Manual Del Usuario página 3

Overview
Remove the covers.
unscrew the adjustment posts to
remove the covers from each of
your four towers.
Slide towers onto bars.
Slide two towers
onto each crossbar.
Find Your 4 M's (measurements).
Locate the precise measurements
for your car on the Q-clip sheet.
Write down your four measurements
in the spaces provided to the right.
keep these instructions in a safe
place for future reference.
If your vehicle is not listed or the
clip sheet is not in the Q-Clip box
check yakima.com/roof-rack-
installation, contact your dealer
or call 888-925-4621.
1033432H-3/30
Prepare for Install front
installation towers
YOU ARE
HERE
Open towers.
Open each tower
to access the
tower screw.
Install rear Perform safety
towers checks
Loosen all four tower
screws until the crossbar
can fit through the tower
(refer to next step).
YOuR CAR: