SATA AE1015 Manual De Instrucciones página 46

4.2.11
4.2.12
Large cylinder operating
to the minimum stroke
4.2.12 Installation of air source triplet
46
AE1015/AE1015-3/AE1015H/AE1015H-3
Slight Tightening
deformation
中文
EN
The distance from the tire-pressing shovel edge to the tire-pressing
rubber is 30 ~ 40 mm (Fig. 4-8).
Fig. 4-8
Tighten the nuts on the front end of cylinder rod. In case of the
minimum working stroke of large cylinder, the extruded rubber mat
generates a slight deformation of about 2 mm.
Fig. 4-9
The air source triplet is removed and placed in the accessory box at
the delivery, and shall be reinstalled by the customer on site. Take the
air source triplet and 2 screws out of the accessory box to remove
the oil and dust, and fix it to the right side of cabinet with the screws
(Fig. 4-10).
Note: The air supply shall be cut off for the installation of air source!
Fig. 4-10
DE RU KO PT JA ES