SATA AE1015 Manual De Instrucciones página 57

Fig. 7-7
Install the elbow attached to the pipe to the cylinder as shown in
Fig. 7-7.
Fig. 7-9
Remove the fixing shaft of auxiliary arm tumbler as shown in Fig.
7-9.
Fig.7-11
Attach the fixing shaft to the auxiliary arm tumbler as shown in Fig.
7-11;
AE1015/AE1015-3/AE1015H/AE1015H-3
中文
EN
Fig. 7-8
Install and tighten the elbow on the cylinder as shown in Fig. 7-8.
Fig. 7-10
Hold the connecting circular guide column while disassembling it
as shown in Fig. 7-10.
Fig.7-12
Pay attention to the direction and connect the tumbler to the hole
below the cylinder as shown in Fig. 7-12.
DE RU KO PT JA ES
57