CARE!
GENERAL TIPS
It is extremely important to clean the knotmakers daily, removing residue, es-
pecially between the cone and the fastener. Detailed instructions about cleaning
are to be found in this manual.
Remove the material remains accumulated under the needles.
Before proceeding to make any adjustment to the machine, ensure that the
problem is not an excessive compaction of the bale.
Do not try to regulate the compaction of the bale with the tension of the cords
used for tying.
Never try to disconnect the baler when it is baling. Wait until
it is completely empty before disconnecting it.
Only leave the tractor after having disconnected the power
socker and the engine, as well as having activated the parling
brake and removed the key from the ignition.
Park the baler on level ground and block the wheels to stop
it moving.
Instructions Manual
35