Lubrication - Nogueira EXPRESS-5040 Manual De Instrucciones

LUBRICATION

The Baler was conceived to require a minimum of lubrication. Regular
lubrication is the best guarantee of substantially increasing the useful life of the
machine.
IMPORTANT!
The lack of oil causes overheating
and damage to the components of
the box.
When lubricating the machine, place
it on level ground.
Use lubricants with a good quality.
Lubricate as indicated in this manual.
TRANSMISSION BOX OF THE POWER SOCKET
Recommended lubricant: 150/CLP.
First change: 50 hours of work.
Quantity of oil: 3 liters.
Next changes: every 150 hours of work.
NOTE: Verify the level by means of the screw M, every 50 hours of work and
fill it up if required.
HOW TO CHANGE:
- Remove the screw P.
- remove the drain Q and let the oil flow out completely.
- Replace the drain Q.
- Replace it with recommended oil, by means of the upper opening P.
- Replace the upper screw P.
P
M
fig. 154
72
ÓLEOS RECOMENDADOS
PETROBRAS
CASTROL
TEXACO
AGIP
SHELL
Instructions Manual
LUBRAX GEAR 150
HYSPIN AWS 150
MEROPA 150
BLASIA 150
OMALA 150
Q
fig. 155