Signature Kitchen Suite SKSIT3601G Manual Del Propietário página 38

38 INSTALLATION INSTRUCTIONS
Where Local Codes Permit
Connecting the Appliance-Grounding
Conductor to the Neutral (White) Wire
Observe all governing codes and local
ordinances.
1
Disconnect the power supply.
2
At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable
wires as shown.
WARNING
You may not ground the cooktop through the
neutral (white) wire if cooktop is used in a new
branch circuit installation (1996 NEC), mobile
home, recreational vehicle, or where local codes
do not permit grounding to the neutral (white)
wire. When grounding to the neutral (white) wire
is prohibited, you must use a 4-wire power supply
cable. Failure to heed this warning may result in
electrocution or other serious personal injury.
3-Wire Grounded Junction Box
Cable from power supply
White wire
(neutral)
Red
wires
Green wire (ground)
Cable from cooktop
If Cooktop is Used in a New Branch
Circuit Installation (1996 NEC),
Mobile Home, Recreational Vehicle,
or where Local Codes Do Not Permit
Grounding to the Neutral (White) Wire
Observe all governing codes and local
ordinances.
1
Disconnect the power supply.
2
At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable
wires as shown.
If connecting to a 4-wire power supply cable
electrical system, the appliance frame connected
ground wire MUST NOT be connected to the
neutral wire of the 4-wire electrical system.
4-Wire Grounded Junction Box
Black
wires
Junction
Green wire (ground)
box
UL-listed
conduit
connector
WARNING
Cable from power supply
Ground
Wire
Red
wires
Cable from cooktop
White wire
(no connection)
Black
wires
Junction box
UL-listed conduit
connector