Switching On And Self Test - Enraf Nonius Radarmed 950+ Instrucciones De Utilizacion

8.9

Switching on and self test

• Switch on the unit using the on/off switch [8].
• Immediately after switching on, the unit carries out a self test
Check that:
• all LED's light up briefly;
• at the end of the test a beep can be heard.
Contact your supplier if this is not the case.
EN109-1435752-42
To plug on the connector
Push on connector
Check to ensure that connector is
secure
To unplug the connector
Pull back ring
Pull out connector
ENGLISH
Page 15 of 29