Monitoring And Control Software; Configuration Software - Gtec Saturn Manual Del Usuario

S
OFTWARE
M
ONITORING AND CONTROL SOFTWARE
3
The PowerShield software guarantees an effective and user-friendly management of the CPS, by displaying all the most
important information such as input voltage, load applied, and battery capacity.
It can also perform automatically shutdown operations, send e-mails, sms and network messages when specific user-selected
events occur.
Installation operations:
▪
Connect the RS232 communication port of the CPS to a COM communication port of the PC via the serial cable
provided* or connect the USB port of the CPS to a USB port of the PC using a standard USB cable*.
▪
Download the software from www.ups-technet.com, selecting the desired operating system.
▪
Follow the installation program instructions.
▪
For more detailed information about installation and use, refer to the software manual which can be downloaded from
our website www.ups-technet.com.
C
ONFIGURATION SOFTWARE
Using special software, it is possible to configure the most important CPS parameters.
For a list of possible configurations, refer to the CPS configuration paragraph.
* We recommend the use of a cable not more than 3 metres long.
105