Instructions for use
•
The covers are pulled over the blue
section of the support only. The black
section should not be covered.
NOTE:
Allen® Support Pads are designed to work
with Allen® Ultra Comfort ™ Covers only.
22. To remove a support from the Allen®
Advance Table, slide the blue clamp
to the unlocked position. When
unlocked, only the red area will show
on the pin.
Chest Support
23. Put the chest support in position on the rail
top at a location dependent on the patient's
gender:
•
Female—install the support so that it
will be above the breasts and below the
clavicle paying close attention to avoid
the brachial plexus.
•
Male—install the pad so that it will be
across the nipple area.
NOTE:
When the support is installed, the indent
should be toward the foot end of the Allen®
Advance Table.
24. Attach the Velcro® straps to hold the support in position.
25. Install an Allen® Ultra Comfort™ Cover on to the support. Make sure
that—
•
The foam side of the cover is on the outside.
•
The cover completely covers the blue material of the support.
NOTE:
Allen® Support Pads are designed to work with Allen® Ultra Comfort
™ Covers only.
30
Allen® Advance Table User Guide (D-720722 Ver D)