Tilt The Support Top - allen A-71101-EU Manual Del Usuario

Instructions for use

Tilt the support top

NOTE:
For bariatric patients, we recommend that you install three supine
access tops (A-70404) to help support the patient during the tilt
procedure.
WARNING:
Before you adjust the Allen® Advance Table or use the tilt feature,
make sure that the brakes are locked, the patient is secured to the
support top and is fully prepared for the movement, and the Allen®
Advance Table is free of objects that could interfere with the
adjustment. Otherwise, patient fall, injury, or equipment damage could
occur.
34. Make sure that—
•
The brakes are locked (the locked indicator on
the Allen® Advance Table display is green).
•
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large security straps to secure the
patient to the support top.
•
The Allen® Advance Table is free of objects that could interfere
with the adjustment.
WARNING:
Observe lines closely during articulations. Always use good line
management techniques. Failure to do so could cause patient fall,
injury, or equipment damage.
35. Press and hold the applicable tilt control until
the support top is at the correct angle. When
you release the control, the support top will
lock at the selected angle.
The tilt indicator on the display will show
how far the support top is tilted to the left
or right.
36. To return the support top to the flat position, press and hold the
opposite tilt control until the top is no longer tilted. The tilt indicator
on the display will be in the center of the tilt indicator area and the tilt
level indicator will be green.
34 Allen® Advance Table User Guide (D-720722 Ver D)