Instructions for use
47. Do as follows to unlock the support
tops for the flip:
p.
Lift the end (A) of the flip handle
until it locks in position.
q.
Push and hold the red safety
lever (B) forward as you pull the
flip handle (A) down to the
released position.
NOTE:
The manual flip indicator on the display
turns orange to show that the support tops
are no longer locked in position and they
can be flipped. The pendant indicator on
the display turns off to show that you can
not use the pendant controls while the
Allen® Advance Table is in flip mode.
48. After the patient has been flipped, and
the tops are level (the tilt level
indicator on the display is green),
push the Flip handle up to the locked
position. You do not need to press the
red safety lever.
NOTE:
The flip indicator on the display
turns off to show that the support tops
are locked in position. The pendant
indicator on the display turns green
to show that you can use the pendant controls.
40
Allen® Advance Table User Guide (D-720722 Ver D)