allen A-71101-EU Manual Del Usuario página 37

i. Insert the cross pin into the H-
bracket, through the bowtie, and
through the other end of the H-
bracket.
WARNING:
Do not use the H-bracket without the cross pin installed correctly. To
do so could cause patient fall, injury, or equipment damage.
j. Make sure the drop lock on the end of the cross pin moves to the
side to hold the H-bracket in position.
k. Repeat steps Step g
through Step j on
the opposite bowtie.
l. Determine which hole location on the H-bracket to install the
support top.
NOTE:
The hole locations are numbered on the side of the H-brackets.
WARNING:
Failure to use correct lifting methods could cause patient fall, injury, or
equipment damage.
m. With the help of another person, align the ends of the support top
with the pre-determined hole location.
WARNING:
Never remove a cross pin from a support top while a patient is on the
support top. Patient fall or injury could occur.
Allen® Advance Table User Guide (D-720722 Ver D)
Instructions for use
37