Put The Allen® Advance Table In A Trendelenburg Position - allen A-71101-EU Manual Del Usuario

Put the Allen® Advance Table in a Trendelenburg
position
WARNING:
Before you adjust the Allen® Advance Table or use the tilt feature,
make sure that the brakes are locked, the patient is secured to the
support top and is fully prepared for the adjustment, and the Allen®
Advance Table is free of objects that could interfere with the
adjustment. Otherwise, patient fall, injury, or equipment damage could
occur.
31. Make sure that—
•
The brakes are locked (the locked indicator on
the Allen® Advance Table display is green).
•
The patient is secured to the support top and is fully prepared for
the adjustment.
NOTE:
We recommend that you use the two large security straps to secure the
patient to the support top.
•
The Allen® Advance Table is free of objects that could interfere
with the adjustment.
WARNING:
Observe lines closely during articulations. Always use good line
management techniques. Failure to do so could cause patient fall,
injury, or equipment damage.
32. Press and hold the applicable Trendelenburg
or Reverse Trendelenburg control until the
support top is at the correct angle.
33. To return to the horizontal position, press and hold the opposite
Trendelenburg control until the lowered column is at the same height as
the raised column.
NOTE:
Near the bottom, on the outside of the
columns, there are numbers to help identify
the height level.
Allen® Advance Table User Guide (D-720722 Ver D)
Instructions for use
33