Cebora KINGSTAR 400 TS Manual De Instrucciones página 71

The MIG process main screen is subdivided into sectors (DN, DB, DC...DM see Fig. 10) and each of these accepts a
touch command. A description of the individual display sectors is given
Sector Description
DN
Main screen status bar
DB Main welding parameter settings menu
DC
Pushbutton for selecting type of welding process MIG pulse, Pulse HD, 3D Pulse, Short,
Short HD, SRS, Root, and Manual, TIG DC, TIG DC APC, TOG DC XP, MMA DC (*)
DE Pushbutton for selecting start type, 2 stroke, 4 stroke, three level, HSA, CRA, SPOT (**)
DF Double level function selection pushbutton. Active in synergic MIG/MAG processes only
DG Machine inductance value adjustment pushbutton (only MIG process)
DH
Machine arc length value adjustment pushbutton (only MIG process)
DI
Menu pushbutton for machine process set-up, process parameters, accessories and
settings.
DL
Job management menu pushbutton
DM Gas test and motor speed menu pushbutton.
(*) If robot interface is activated, the TIG DC / APC / XP MMA processes are not available.
(**) If robot interface is activated, only 2 stroke start-up is available.
3301065/A
below.
Fig. 10
71/109