Lan Setup; Advanced Functionalities - Cebora KINGSTAR 400 TS Manual De Instrucciones

7�4�5

LAN setup

The power source is equipped with a 100Mbit Ethernet port with built-in web server that can be connected to a LAN
and therefore communicate with personal computers and other devices connected to the LAN quickly using standard
protocols.
The network card MAC address is shown at the top right of the configuration screen.
Network configuration :
Connect the network cable to the connector on the back of the power source.
The network can be configured in manual or automatic mode.
Manual
Set the value of each field between 0 and 255 for IP Address and Netmask.
The Gateway and DNS fields can be left at 0.0.0.0 because they are currently unused.
Confirm the configuration by pressing the pushbutton with the checkmark.
Automatic
If a DHCP server is configured in the network for automatic address allocation, select the DHCP
pushbutton at the top left, then confirm using the pushbutton with the checkmark.
Use the pushbutton MENU -> Information to check the IP number currently used in the power
source.
If network communication is correctly established, a fixed icon appears on the status bar
Connection via browser
Start a browser (e.g. Google Chrome) on a personal computer and enter https://<IP Address> of the power
source in the browser address bar
(for example:https://192�168�13�198) and press Cebora to open the Cebora webapp homepage.
7�4�6

Advanced functionalities

For integration in advanced IT systems as required by Industria 4.0, the power source displays an API REST open
interface that allows data exchange through standard commands. Detailed documentation on the application
protocol is available on request.
NOTE.
Certificate
Because connection is via the https secure profile (encrypted), up-to-date browsers display an information message regarding the trustworthiness
of the site visited (the power source).
To overcome this check, a Trusted Root Certificate (file .crt) must be installed on your PC to allow connection to the entire power source family
without further warnings.
The file can be downloaded directly from the webapp via the icon
The certificate input procedure depends on the browser used and the type of operating system. For Chrome for Windows, go to:
Settings → Advanced→ Privacy and security → Manage certificates.
The Windows Certificates dialogue box will open. Click on the Trusted Root Certification Authorities tab, click the Import key, select the .crt file
provided and click Next until the procedure is complete.
3301065/A
Select Menu -> Settings -> Lan Setup
Turn I to choose the required field and press I to confirm, then change
the required values.
Confirm the address using the pushbutton with the checkmark.
Exit the menu by pressing the return pushbutton.
.
95/109