Changing Of Inverter Parameters - SMA INVERTER MANAGER Instrucciones De Instalación

5 LCS-Tool
5.2.12 Changing of Inverter
Parameters
INFORMATION
All inverter parameters are Grid Guard
protected and require the Grid Guard code for
changes. To change the inverter settings, use
your SMA Grid Guard code under the user
group Installer (see Section 5.2.4, page 31).
igure 29: LCS-Tool - changing of inverter parameters
Procedure:
1. Open the LCS-Tool.
2. Log in as an Installer.
3. Call up the menu Setup.
4. Enter the respective values under Inverter
Parameter.
5. Select [Save] to save the changes.
40 IMVIOBOX-IA-xx-18
SMA Solar Technology AG
FNN Note
In Germany, according to NN note
"Connecting and operating storage units in low
voltage networks" (October 2016), systems
eligible under the IT scheme in accordance
with EEG and KWKG are not allowed to feed
energy from storage units into the utility grid. To
ensure this, the input value for Discharge
Setpoint/Consumption Limit is not allowed
to be negative.
Deactivating/Activating the inverter
parameters
To activate and deactivate a parameter, double-click
on the parameter using the left mouse button.
When the parameters are activated, the input felds
and buttons are enabled. Inactive parameters are
marked with disable.
Installation Manual