Closemount-Style Fan Mounting - Harbor Breeze RLG52NWZ5L Manual Del Usuario

DOWNROD-STYLE FAN MOUNTING
6. Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align one of the slots in
hanging ball with tab in mounting bracket (C).
DANGER: Failure to align one of the slots in
the ball with the tab may result in serious injury or
death.
Continue to WIRING on page 12.

CLOSEMOUNT-STYLE FAN MOUNTING

1. Remove preassembled canopy cover from bottom of
canopy (B). NOTE: To remove canopy cover from
canopy (B), twist canopy cover until the two small
protrusions on the inner lip of the canopy cover align
with the two notches on the bottom of the canopy
(B). Pull on canopy cover to remove.
NOTE: The downrod (A) and canopy cover are not
used in this type of installation.
Remove every other preassembled screw and lock
2.
washer from top of motor housing (D).
6
A
1
2
D
10
Tab
Slot
Canopy
Cover
Screw
Lock Washer
C
B